Caterpillar provides maintenance solutions for automotive brake systems

Brake system cleaner
The use of environmentally friendly non-fluorocarbon special solvent can effectively clean the oil stains and dust on the brake disc, caliper, wheel hub and other parts, ensure the heat dissipation of the brake disc and extend its service life.
Spray the parts to be cleaned until the dust and oil stains are completely cleaned, and then wipe with a clean towel, leaving no dust and residual liquid, rust or uneven parts are polished with sandpaper before cleaning.

Branch pump guide pin lubricant Art.-Nr.202
With excellent high and low temperature resistance and water resistance, it can keep the caliper piston dust jacket soft and elastic, enhance the corrosion resistance of the guide pin, and extend the service life of the branch pump.
First clean the pump guide groove with brake disc cleaner, then sand the pump guide pin with sandpaper, and then insert a special brush into the guide pin groove to scrub the guide pin groove, and finally apply a thin layer on the guide pin surface and guide groove with a finger sleeve or a small brush, do not abuse with any mineral oil.

High temperature protective agent for brake pads Art.-Nr.203
With high temperature resistance, adhesion and lubrication performance, can reduce the vibration amplitude of the brake pads, effectively reduce the brake scream and prevent the brake pads and card slots and calipers before the heat stuck.
First on the 800 mesh sandpaper in the shape of 8 font sanding 3 times, and then use the brake disc cleaning agent to clean the brake pads, brake pads, brake clamps and other parts, and finally use a finger sleeve or a small brush on the back of the brake pads (front disable), brake pads, brake clamps apply a thin layer.

High temperature and bite resistant lubricant Art. -Nr.204
It has excellent high temperature resistance and anti-adhesion, which can effectively prevent the rust of the contact surface between the hub and the bearing and the bite caused by high temperature, which is easy to remove the hub and extend the service life of the hub bearing.
First use the wheel hub shaft anti-stuck rust removal special tools to polish the wheel and the rim contact, and then clean the wheel with brake disc cleaning agent, and then use a finger sleeve or a small brush to wipe a thin layer on the hub and the rim contact part and the center shaft around the root.